We supply liquid cooling pumps for standalone orders and cooling-module projects. Share your operating requirements and installation details to discuss the model and configuration for your application.
A compact pump with PWM speed control and FG speed feedback for a defined liquid-cooling configuration.
Specify the complete part number when requesting a quotation. The manufacturer drawing defines the body, hose connections and cable assembly.
Speed tolerance: ±10%. At 0% PWM, this model continues to run at 3000 RPM nominal. Electrical ratings use purified water as the test fluid; startup peak current is listed separately in the PDF.
The operating point depends on your complete cooling loop, including the cold plate, tubing and connections.
The manufacturer’s PDF includes a flow–head curve at 12V and 4500 RPM. Flow and head must be read together at the required operating point; the two curve endpoints are not a simultaneous performance rating.
Share your target flow, pressure drop, coolant and fluid temperature for a project-specific discussion.
View Flow–Head CurveThe drawing shows a 40.30 × 40.30 mm body footprint, hose connections and a four-pin cable assembly. Allow for the ports, cable routing and mounting clearances shown in the complete drawing.
Use the stated connector orientation and pin definition. This pump requires liquid during operation; coolant compatibility and working pressure need to match the application.
View Dimensions and WiringOrder by part number or send the configuration you need for your cooling assembly.
Send the part number, quantity and delivery requirements. Include any reference drawing or specification revision that your project requires.
Tell us about your hose connections, installation envelope and cable requirements. We will discuss which changes can be supported for the selected model.
Get the original PDF for each model directly. No sign-in or inquiry form is required.
Manufacturer specification · Rev B · 2026-05-25 · 27 pages · PDF 3.6 MB
Original manufacturer documents, including drawings, control information and test conditions. Match the complete part number and revision to your requested configuration.
Answers about ordering, control and the technical information available for your project.
